McDATA OPENconnectors Command Line Interace Bedienungsanleitung PDF herunterladen (Seite 98)

100

101

2-54

E/OS Command Line Interface User Manual

config

config.security.authentication.RADIUS.show

Syntax show

Purpose This command displays the current RADIUS server configuration.

Parameters This command has no parameters.

Command Example

Root> config security authentication RADIUS show

Output This command displays all three configured RADIUS servers.

Output Example The output for the config.security.authentication.RADIUS.show

command appears as follows:

Deadtime: 0

Index IP Address Port Attempts Timeout

----- ------------- ---- ---------- -------

1 1.1.1.1 1111 3 2

2 2.2.2.2 2222 3 2

config.security.authentication.RADIUS.timeout

Syntax timeout index seconds

Purpose This command configures the waiting time, in seconds, for a response

from the RADIUS server before retransmitting a packet. The default

value is 4 seconds.

In extreme cases, where E_Port or N_Port authentication occur on a

large number of ports with RADIUS, and a switch is coming online,

users may need to increase the timeout value so that all the ports can

Deadtime The amount of time a server is marked as “dead”.

Server The IP address and UDP port of the configured

RADIUS server.

Attempts The number of transmit attempts.

Timeout The timeout value for a server in seconds.

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 405 406

Kommentare zu diesen Handbüchern

Keine Kommentare

McDATA OPENconnectors Command Line Interace Bedienungsanleitung Seite 98

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung McDATA OPENconnectors Command Line Interace