McDATA OPENconnectors Command Line Interace Bedienungsanleitung PDF herunterladen (Seite 334)

100

101

A-32

E/OS Command Line Interface User Manual

Description There are no attached nodes.

Action To add more members, attach more devices to the switch or add the

members by WWN or Domain ID and port.

Message Error 217: All Attached Nodes are in the Zone

Description All the attached nodes are already in the zone.

Action To add more members, attach more devices to the switch or add the

members by WWN or Domain ID and port.

Message Error 218: Invalid Port Number

Description The value entered for the port number is invalid

Action Enter a port number within the range supported by your director or

switch.

Message Error 219: Invalid Port Type

Description The port type configured is invalid.

Action A port may be configured to be an eport, gport, or fport. Be sure the

port is configured appropriately and re-submit the command. On the

Sphereon 4300 and Sphereon 4500 only, fxport and gxport types are

also supported. On the Sphereon 4300, the Fabric Capable feature

must be installed to configure a E_Port, G_Port, or Gx_Port.

Message Error 220: Cannot run diagnostics while a device is logged in to the

port

Description Diagnostics cannot be run while a device is logged into the port.

Action Block the port to run diagnostics.

Message Error 221: Cannot run diagnostics on an active E Port

1 2 ... 329 330 331 332 333 334 335 336 337 338 339 ... 405 406

Kommentare zu diesen Handbüchern

Keine Kommentare

McDATA OPENconnectors Command Line Interace Bedienungsanleitung Seite 334

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung McDATA OPENconnectors Command Line Interace