McDATA OPENconnectors Command Line Interace Bedienungsanleitung PDF herunterladen (Seite 209)

100

101

CLI Commands

2-165

perf

Parameters This command has the following parameters:

Command Example

Root> perf thresholdAlerts counter setCounter checklinks 1

perf.thresholdAlerts.counter.setParams

Syntax setParams name increment interval

Purpose This command sets the increment and interval times for a specified

counter threshold alert.

NOTE: An alert cannot be modified unless it is in the disabled state. Verify

that the alert is disabled before executing this command.

Parameters This command has the following parameters:

Example If ports 0,1, or 2 CRC Error counter increments more then 5 times

within a period of 30 minutes, send an alert.

Port list = 0, 1, 2

CTA Counter = CRCErrors

Increment value= 5

Interval Time = 30

name The name of a counter threshold alert as defined by

the command perf.thresholdAlerts.counter.addAlert,

described in 2-161.

counterNumber Specifies the counter number. Valid values are

shown in Table 2-3, Alert Counters, page 2-159.

name The name of a counter threshold alert as defined by

the command perf.thresholdAlerts.counter.addAlert,

described on 2-161.

increment This sets the number of times a counter must

increment during the interval period to trigger the

alert. Acceptable values are in the range of 1 to

70,560.

interval This sets the interval time in minutes for the alert.

Acceptable values are in the range of 5 to 70,560

minutes.

1 2 ... 204 205 206 207 208 209 210 211 212 213 214 ... 405 406

Kommentare zu diesen Handbüchern

Keine Kommentare

McDATA OPENconnectors Command Line Interace Bedienungsanleitung Seite 209

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung McDATA OPENconnectors Command Line Interace