McDATA OPENconnectors Command Line Interace Bedienungsanleitung PDF herunterladen (Seite 151)

100

101

CLI Commands

2-107

config

Parameters This command has one parameter:

Command Example

Root> config switch domainIDOffset 160

config.switch.domainRSCN

Syntax domainRSCN domainRSCNState

Purpose Sets the domain RSCN state for the switch or director. You can run

this command when the switch or director is either offline or online.

When this parameter is enabled, domain registered state change

notifications (domain RSCNs) are sent between end devices in a

fabric to provide additional connection information to host bus

adapters (HBA) and storage devices.

As an example, this information might be that a logical path has been

broken because of a physical event, such as a fiber optic cable being

disconnected from a port.

Parameters This command has one parameter:

Command Example

Root> config switch domainRSCN 1

offset The Domain ID offset. Values are in hexadecimal.

Valid values are:

128

160

192

domainRSCNState Specifies whether the domain RSCN state is

enabled. Valid values are enable and disable. Boolean

1 and 0 may be substituted as values.

1 2 ... 146 147 148 149 150 151 152 153 154 155 156 ... 405 406

Kommentare zu diesen Handbüchern

Keine Kommentare

McDATA OPENconnectors Command Line Interace Bedienungsanleitung Seite 151

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung McDATA OPENconnectors Command Line Interace