McDATA OPENconnectors Command Line Interace Bedienungsanleitung PDF herunterladen (Seite 139)

100

101

CLI Commands

2-95

config

Parameters This command has one parameter:

Command Example

Root> config snmp deleteV3Group 1

config.snmp.sendTestTrap

Synopsis sendTestTrap

Purpose This command instantly generates the fcConnUnitEvent trap with

event type as “status” and event description as “Reason code 0”.

Parameters This command has no parameters.

Command Example

Root> config snmp sendTestTrap

config.snmp.setSNMPv3State

Syntax setSNMPv3State enabledState

Purpose Enables / disables SNMPv3.

NOTE: If the SNMP User Table, Access Table, and Security-to-Group Tables

are not properly configured, SNMP access will be lost upon completion of

this command. Use the command config.snmp.validateUser to ensure proper

configuration of user entries.

Parameters This command has one parameter:

Command Example

Root> config snmp setSNMPv3State enable

config.snmp.setFaMibVersion

Syntax setFaMibVersion versionNumber

index Index of the user entry. Valid values are 1 to 6.

enabledState Enabled state of SNMPv3. This can be set to enable

or disable. Boolean 1 and 0 values may also be

substituted.

1 2 ... 134 135 136 137 138 139 140 141 142 143 144 ... 405 406

Kommentare zu diesen Handbüchern

Keine Kommentare

McDATA OPENconnectors Command Line Interace Bedienungsanleitung Seite 139

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung McDATA OPENconnectors Command Line Interace