McDATA OPENconnectors Command Line Interace Bedienungsanleitung PDF herunterladen (Seite 288)

100

101

2-244

E/OS Command Line Interface User Manual

show

Output This command displays the following switch configuration data:

Output Example The output from the show.snmp.userTable command appears as

follows:

SNMPv3 State: Enabled

Index Username Auth Protocol Privacy Protocol

----- -------------------------------- ----------------- ----------------

1 User1 No Authentication No Privacy

2 User2 HMAC-MD5 No Privacy

3 User3 HMAC-SHA DES

NOTE: This command and the command config.snmp.showUserTable on

page 22-100 has the same functionality.

show.snmp.V3GroupTable

Syntax V3GroupTable

Purpose Displays the Security-to-Group table.

Parameters This command has no parameters.

Command Example

Root> show snmp v3GroupTable

SNMPv3 State Indicates the status of SNMPv3 (Enabled or

Disabled).

Index The index number.

Username The username.

Auth Protocol The Authentication Protocol.

Privacy Protocol The Privacy Protocol.

1 2 ... 283 284 285 286 287 288 289 290 291 292 293 ... 405 406

Kommentare zu diesen Handbüchern

Keine Kommentare

McDATA OPENconnectors Command Line Interace Bedienungsanleitung Seite 288

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung McDATA OPENconnectors Command Line Interace