McDATA OPENconnectors Command Line Interace Bedienungsanleitung PDF herunterladen (Seite 158)

100

101

2-114

E/OS Command Line Interface User Manual

config

Parameters This command has one parameter:

Command Example

Root> config switch safeZoning enable

config.switch.speed

Syntax speed switchSpeed

Purpose This command sets the speed for the switch.

NOTE: This command is only applicable for the Intrepid 6064.

NOTE: The switch must be set offline before this command is entered.

A switch can be configured to operate at 1 Gbps or 2 Gbps.

If the switch has FPM cards, configuring the switch speed to 2 Gbps

makes all the ports on the FPM cards inactive, and their operational

state will be set to inactive. FPM ports do not support 2 Gbps and,

therefore, will remain inactive after the switch is returned to the

online state.

Parameters This command has one required parameter.

Command Examples

Root> config switch speed 2g

config.switch.show

Syntax show

Purpose This command displays the switch configuration.

NOTE: The switch can be either offline or online when this command is

executed.

safeZoningState This parameter can be set to enable or disable.

Boolean 1 and 0 values may also be substituted.

switchSpeed Specifies the speed of the switch. Valid values are 1

Gb/s or 2 Gb/sec.

1 2 ... 153 154 155 156 157 158 159 160 161 162 163 ... 405 406

Kommentare zu diesen Handbüchern

Keine Kommentare

McDATA OPENconnectors Command Line Interace Bedienungsanleitung Seite 158

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung McDATA OPENconnectors Command Line Interace