McDATA OPENconnectors Command Line Interace Bedienungsanleitung PDF herunterladen (Seite 154)

100

101

2-110

E/OS Command Line Interface User Manual

config

shortest path (or the path which would take the least amount of time

for traffic to travel) to a destination.

Parameters This command has two parameters:

TIP: It is recommended that all the switches in the fabric to be configured have the

same value for the ISL FSPF Cost Configuration parameter.

Command Example Root> config switch islFSPFCost ignore

config.switch.ltdFabRSCN

Syntax ltdFabRSCN ltdFabRSCNState

Purpose This command sets the status of limited fabric RSCNs. When enabled,

fabric registered state change notifications (RSCNs) are suppressed

during an IPL.

Parameters This command has one parameter:

Command Example

Root> config switch ltdFabRSCN 1

config.switch.prefDomainId

Syntax prefDomainId domainId

Purpose This command sets the preferred domain ID for the switch or

director. The switch or director must be offline to complete this

command.

ignore

Every ISL has the same FSPF cost. In essence,

the actual FSPF cost is ignored.

port

Each ISL has a McDATA default cost, which

depends on the speed of the port.

ltdFabRSCNState Specifies whether the limited fabric RSCN state is

enabled. Valid values are enable and disable. Boolean 1

and 0 may be substituted as values.

1 2 ... 149 150 151 152 153 154 155 156 157 158 159 ... 405 406

Kommentare zu diesen Handbüchern

Keine Kommentare

McDATA OPENconnectors Command Line Interace Bedienungsanleitung Seite 154

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung McDATA OPENconnectors Command Line Interace