McDATA OPENconnectors Command Line Interace Bedienungsanleitung PDF herunterladen (Seite 316)

g-16

Enterprise Operating System Command Line Interface User Manual

Glossary

the packets more quickly. Typically, a subnet may represent all the

machines at one geographic location, in one building, or on the same

local area network.

switch A device that connects, filters and forwards packets between local

area network (LAN) segments or storage area network (SAN) nodes

or devices.

switch binding A security method that limits the devices that can log in to a switch,

by specifying the node WWN of the allowed devices in the Switch

Membership List.

Switch Membership

List

The list of devices, specified by WWN, that can log in to a switch.

switch priority Value configured into each switch in a fabric that determines its

relative likelihood of becoming the fabric’s principal switch. Lower

values indicate higher likelihood of becoming the principal switch. A

value of 1 indicates the highest priority; 225 is the lowest priority. A

value of 225 indicates that the switch is not capable of acting as the

principal switch. The value 0 is illegal.

telnet A protocol designed to provide general, bi-directional, eight-bit byte

oriented communication. It is a standard method of interfacing

terminal devices and terminal-oriented processes to each other.

topology The logical, physical, or both arrangement of stations on a network.

trap Unsolicited notification of an event originating from a simple

network management protocol (SNMP) managed device and directed

to an SNMP network management station.

UPM See universal port module.

1 2 ... 311 312 313 314 315 316 317 318 319 320 321 ... 327 328

Keine Kommentare

McDATA OPENconnectors Command Line Interace Bedienungsanleitung Seite 316