McDATA OPENconnectors Command Line Interace Bedienungsanleitung PDF herunterladen (Seite 211)

CLI Commands

2-167

show

Output The port information data is displayed as a table that includes the

following properties.

Output Example The output from the show.port.info command displays as follows.

Port WWN OpSpeed SpeedCap

---- ----------------------- -------- --------

0 10:00:80:00:11:22:33:44 1 Gb/sec 2 Gb/sec

1 10:00:80:01:11:22:33:44 1 Gb/sec 2 Gb/sec

2 10:00:80:02:11:22:33:44 1 Gb/sec 2 Gb/sec

3 10:00:80:03:11:22:33:44 1 Gb/sec 2 Gb/sec

4 10:00:80:04:11:22:33:44 2 Gb/sec 2 Gb/sec

5 10:00:80:05:11:22:33:44 2 Gb/sec 2 Gb/sec

6 10:00:80:06:11:22:33:44 2 Gb/sec 2 Gb/sec

7 10:00:80:07:11:22:33:44 2 Gb/sec 2 Gb/sec

8 10:00:80:08:11:22:33:44 2 Gb/sec 2 Gb/sec

9 10:00:80:09:11:22:33:44 2 Gb/sec 2 Gb/sec

10 10:00:80:10:11:22:33:44 1 Gb/sec 2 Gb/sec

11 10:00:80:11:11:22:33:44 1 Gb/sec 2 Gb/sec

12 10:00:80:12:11:22:33:44 1 Gb/sec 2 Gb/sec

13 10:00:80:13:11:22:33:44 1 Gb/sec 2 Gb/sec

14 10:00:80:14:11:22:33:44 1 Gb/sec 2 Gb/sec

15 10:00:80:15:11:22:33:44 1 Gb/sec 2 Gb/sec

show.port.nodes

Syntax nodes portNumber

Purpose This command displays the loginserver entries for a specified port.

This command is valid only on the Sphereon 4300 and Sphereon 4500

switches.

Port The port number.

WWN The WWN of the port.

OpSpeed The current operating speed (1 Gb/sec,

2 Gb/sec, or Not Established).

SpeedCap The current transceiver capability speed

(1 Gb/sec or 2 Gb/sec).

1 2 ... 206 207 208 209 210 211 212 213 214 215 216 ... 327 328

Keine Kommentare

McDATA OPENconnectors Command Line Interace Bedienungsanleitung Seite 211