McDATA OPENconnectors Command Line Interace Bedienungsanleitung PDF herunterladen (Seite 232)

2-188

Enterprise Operating System Command Line Interface User Manual

show

Output Example The output from the show.switch command displays as follows.

State: Online

BB Credit: 2

R_A_TOV: 20

E_D_TOV: 4

Preferred Domain Id: 1

Switch Priority: Default

Speed: 2 Gb/sec

Rerouting Delay: Enabled

Interop Mode: Open Fabric 1.0

Active Domain Id: 1

World Wide Name: 10:00:08:00:88:00:21:07

Insistent Domain Id: Enabled

Domain RSCN: Enabled

Zoning RSCN: Disabled

FC Address Domain Id: 67 (hexadecimal)

Limited Fabric RSCN: Disabled

show.system

Syntax system

Purpose This command displays a set of system attributes.

Parameters This command has no parameters.

Command Example

Root> show system

Output The system attributes are displayed as a table that includes the

following properties.

Name The system name as set in the

config.system.name command. For more

information, see config.system.name on

page 2-83.

Contact The system contact as set in the

config.system.contact command. For more

information, see config.system.contact on

page 2-81.

Description The system description as set in the

config.system.description command. For more

information, see config.system.description on

page 2-82.

1 2 ... 227 228 229 230 231 232 233 234 235 236 237 ... 327 328

Keine Kommentare

McDATA OPENconnectors Command Line Interace Bedienungsanleitung Seite 232