McDATA 1U Server Wartungshandbuch PDF herunterladen (Seite 47)

Installation Tasks

2-5

Installation Tasks

Task 1: Verify Installation Requirements

Verify that the following requirements are met prior to director and

management interface installation. Ensure:

• A site plan and planning tasks are complete. Refer to the

McDATA Products in a SAN Environment - Planning Manual

(620-000124).

• Fibre Channel SAN design is complete. Refer to the McDATA

Products in a SAN Environment - Planning Manual (620-000124).

• Support is available for one of the following product

management methods:

— A management server or browser-capable PC and LAN

segment connectivity to support operation of SAN

management and Element Manager applications, or

— A browser-capable PC and Internet connectivity to support

the product-resident EFCM Basic Edition interface.

• Support equipment and technical personnel are available for the

installation.

• The required number and type of fiber-optic jumper cables are

delivered and available. Ensure cables are the correct length and

have the required connectors.

• A Fabricenter cabinet or standard 19-inch equipment rack and

associated hardware are available.

• Remote workstations or simple network management protocol

(SNMP) workstations are available (optional). Workstations are

connected through a public or dedicated LAN segment.

Task 2: Unpack, Inspect, and Install the Ethernet Hub (Optional)

The director is managed through either:

• A 10/100 megabit per second (Mbps) LAN connection to a

management server. Connectivity may require installation of a

24-port Ethernet hub. A combination of up to 48 products can be

configured and managed on one network, therefore multiple,

daisy-chained hubs may be required to provide sufficient port

connections.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 429 430

Keine Kommentare

McDATA 1U Server Wartungshandbuch Seite 47