McDATA 1U Server Wartungshandbuch PDF herunterladen (Seite 250)

5-14

Intrepid® 6140 Director Installation and Service Manual

Removal and Replacement Procedures (RRPs)

2. Hold the card by its stiffener. Orient the card so that the locking

Allen screw (yellow) on the card aligns with the yellow "lock"

symbol on the frame. Verify that the card is aligned in the card

tracks (Figure 5-3), then slide it forward until it makes contact

with the backplane.

3. Secure the port card:

a. Insert the torque tool into the cam Allen screw (uncolored).

Turn the torque tool clockwise until you feel it release and

hear a clicking sound. As the screw turns clockwise, the card

cams into the backplane connector.

b. Insert the torque tool into the locking Allen screw (yellow).

Turn the torque tool clockwise until you feel it release and

hear a clicking sound. As the screw turns clockwise, the card

locks into place.

c. Verify the card stiffener is flush with the front of the card cage

andevenwithotherdirectorlogiccards.

4. Performan externalloopbacktestforall ports on thereplacement

port card (Performing Loopback Tests on page 4-21). If the test fails,

go toChapter 3,MaintenanceAnalysisProcedures(MAPS)to isolate

the problem.

5. Reconnect a fiber-optic jumper cable to each port on the card as

follows.Inspectthelabelon thejumpercableto ensurethecorrect

connection. Repeat this step for all four ports.

a. Remove the protective cap from the cable connector and the

protective plug from the portopticaltransceiver. Store the cap

and plug in a suitable location for safekeeping.

b. Clean the cable and port connectors (IML, IPL, or Reset the

Director on page 4-38).

c. Insert the keyed LC cable connector into port optical transceiver.

6. If necessary, replace the RFI shield.

7. Disconnect the ESD wrist strap from thedirector chassis and your

wrist.

8. Inspect the port card to ensure all amber LEDs are extinguished.

If any amber LEDs are illuminated, go to Chapter 3, Maintenance

Analysis Procedures (MAPS) to isolate the problem.

1 2 ... 245 246 247 248 249 250 251 252 253 254 255 ... 429 430

Keine Kommentare

McDATA 1U Server Wartungshandbuch Seite 250